Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Flame Resistant Conveyor Belt for Coal Handling

Flame-resistant and anti-static belt for coal handling, underground and enclosed conveyors.

Minimum order300 m

Similar products
  • Flame-resistant compound
  • Anti-static options
  • Coal handling safety
  • Rubber or solid woven type

Flame resistance on a conveyor belt is a certification matter, not a material preference. Underground and enclosed conveyors are governed by a specific standard in each market, and the belt has to be tested and marked to that standard for the installation to be accepted.

Construction can be flame-resistant rubber over an EP or NN carcass, or solid woven with PVC/PVG covers. Strengths run 315–3150 N/mm for rubber fabric belts and 680S–2500S for solid woven, in widths from 500 to 2200 mm. Anti-static grades are available on request.

Tell us which standard applies at your site, where the conveyor is installed, and the rating, width and length you need. We will not quote a flame-resistant belt without the standard confirmed — the wrong certificate makes the belt unusable regardless of how it performs.

Note that this is not a heat-resistant belt. Working range is −20 to +80 °C; for hot material use the heat resistant belt instead.

Specifications

Carcass EP, NN or solid woven
Belt width 500–2200 mm typical
Key property Reduced flame propagation, anti-static options
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Flame-resistant rubber or solid woven belt Select by safety requirement
Carcass options EP, NN or solid woven Depends on application
Belt width 500–2200 mm typical Custom sizes available
Strength range 315–3150 N/mm typical for rubber fabric; 680S–2500S for solid woven Confirm by design
Cover type Flame-resistant rubber or PVC/PVG cover Anti-static option on request
Working temperature −20 to +80 °C typical Not a heat-resistant substitute
Key advantage Reduced flame propagation and safer operation Testing requirement must be confirmed
Applications Coal mines, coal handling, power plants, enclosed conveyors Safety-critical material handling
Inquiry data Required standard, installation location, belt rating, width, length Needed before quotation

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.