Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Accessories

H-Type Tungsten Carbide Belt Cleaner

Heavy-duty primary cleaner with tungsten carbide tips, for ore, clinker and other highly abrasive material.

Similar products
  • Heavy-duty primary cleaning for abrasive material
  • Replaceable carbide tips
  • Suitable for continuous industrial conveyor systems
  • Maintains stable cleaning under different conditions

Where a polyurethane blade is worn through in weeks, tungsten carbide is the answer. Carbide tips hold their edge against ore, clinker and limestone long after a polymer blade has rounded off and stopped cleaning.

The trade-off is that carbide is unforgiving. A hard tip at the wrong angle or the wrong tension will damage the belt cover, and it will not wear away harmlessly the way polyurethane does. Mounting geometry and tension have to be correct from the first day.

Frames are carbon steel or optional stainless steel for belt widths from 500 to 2400 mm, installed at the head pulley discharge point.

Carbide is the right choice for abrasive duty and the wrong choice for a mechanically spliced belt or a belt in poor condition. Tell us the material, the belt condition and the splice type and we will confirm which blade suits.

Specifications

Cleaner type Primary belt cleaner
Blade material Tungsten carbide / alloy carbide
Applicable belt width 500–2400 mm, customizable

Technical specifications

Parameter Typical specification Selection note
Product name H-Type Tungsten Carbide Belt Cleaner
Cleaner type Primary belt cleaner Heavy-duty abrasive service
Blade material Tungsten carbide / alloy carbide Where polyurethane wears too quickly
Frame material Carbon steel / stainless steel optional Stainless for washdown and corrosive duty
Applicable belt width 500–2400 mm, customizable Confirm with belt width and chute clearance
Installation position Head pulley discharge point Requires access for tensioning and tip change
Suitable materials Ore, coal, aggregate, clinker, limestone, cement Abrasive and heavy-duty conveyor systems
Customization Suitable for abrasive and heavy-duty conveyor systems Made to existing frame or drawing

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.