Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Nylon Conveyor Belt for Impact Loading

Nylon-carcass belt with high flexibility and impact resistance, for severe loading zones and small pulleys.

Minimum order300 m

Similar products
  • Abrasion-resistant rubber cover
  • Flexible fabric carcass
  • Custom width and ply rating
  • Compatible with rollers and pulleys

NN belts trade EP’s dimensional stability for flexibility and impact strength. The nylon carcass absorbs lump impact at the loading zone and troughs readily, and it tolerates smaller pulley diameters — which is what makes it the practical choice on compact conveyor layouts.

Ratings are typically NN100 to NN400 per ply, 2 to 8 plies, in widths from 400 to 2200 mm, with 2–12 mm top covers and 1.5–6 mm bottom covers.

The trade-off is elongation: nylon stretches more in service than polyester, so on long centres an EP belt is usually the better engineering answer. For quarry, coal and aggregate conveyors with hard loading and short centres, NN is the one that survives.

Specifications

Carcass NN100–NN400 per ply typical
Belt width 400–2200 mm typical
Key property Flexibility and impact resistance
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type NN nylon fabric rubber conveyor belt Flexible fabric belt
Common ratings NN100–NN400 per ply typical Confirm required rating
Belt width 400–2200 mm typical Custom widths by project
Ply number 2–8 plies typical Higher plies for impact and tension
Cover thickness Top 2–12 mm; bottom 1.5–6 mm Increase top cover for loading impact
Cover grade General or abrasion-resistant rubber Other grades on request
Working temperature −20 to +80 °C typical Use special compounds for extremes
Key advantage Flexibility and impact resistance Suitable for compact layouts
Applications Quarries, coal, aggregate, cement, loading conveyors Medium-duty to heavy-duty use

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.