Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Sidewall Conveyor Belt for Steep Incline Conveying

Corrugated sidewall and cross-cleat belt for steep incline and vertical lift where floor space is limited.

Minimum order300 m

Similar products
  • Steep-angle conveying
  • Space-saving layout
  • Custom cleat design
  • High-lift material transfer

A sidewall belt turns the belt into a moving container. Corrugated walls bonded along each edge hold the material in, cross cleats stop it sliding back, and the result will convey up to vertical where a conventional inclined conveyor would need a run of many times the height.

Base belt is EP fabric or reinforced rubber, with steel cord available for special high-tension cases, in widths from 500 to 2400 mm. Sidewalls run 40 to 400 mm, with T, TC, TCS or custom cleats at a pitch set by layout and capacity.

This is an engineered belt, not a stock item. Sidewall height, cleat type and pitch are derived from capacity, angle, lift height and material, and they interact — raising the wall to gain capacity changes the minimum pulley diameter the belt will tolerate.

Send us capacity, conveyor angle, lift height, material and a layout drawing. Without a drawing we cannot confirm the design, and a sidewall belt that does not match its conveyor cannot be adjusted on site.

Specifications

Sidewall height 40–400 mm typical
Cleat type T, TC, TCS or custom cleat
Conveyor angle 0–90° depending on design
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Corrugated sidewall conveyor belt Steep angle conveying
Base belt EP fabric or reinforced rubber belt Steel cord option for special high tension
Belt width 500–2400 mm typical Depends on capacity and sidewall height
Sidewall height 40–400 mm typical Select by material load and angle
Cleat type T, TC, TCS or custom cleat Depends on material and incline
Cleat pitch Custom by layout and capacity Confirm with drawings
Conveyor angle 0–90 degrees depending on design Vertical conveying possible with proper design
Applications Cement, aggregate, mining, fertilizer, recycling Space-saving transfer
Inquiry data Capacity, angle, lift height, material, drawing Required for accurate design

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.