Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Rubber Conveyor Belt for Bulk Material Handling

General-purpose fabric-reinforced rubber belt for everyday bulk conveying in mining, cement and ports.

Minimum order300 m

Similar products
  • Abrasion-resistant rubber cover
  • Flexible fabric carcass
  • Custom width and ply rating
  • Compatible with rollers and pulleys

This is the belt most bulk conveyors run on. A reinforced fabric carcass carries the tension, durable rubber covers take the abrasion and impact, and the construction is deliberately ordinary so it works with standard troughing idlers, pulleys and belt cleaners.

Carcass options are EP, NN or cotton fabric, from 2 to 6 plies, in tensile ratings from 100 to 3150 N/mm. Top covers run 1.5–10 mm and bottom covers 1.5–6 mm; the top cover is the number to increase when the material is abrasive or the loading point is severe.

Working range is −20 to +80 °C. Outside that, or where oil, flame or chemical exposure is involved, the correct answer is a specific grade rather than a thicker general belt — see the heat, cold, oil, flame and acid-alkali resistant belts in this section.

Specifications

Carcass EP, NN or cotton fabric on request
Belt width 400–2200 mm typical
Cover grade General, abrasion-resistant or project-specified rubber
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Fabric reinforced rubber conveyor belt General duty bulk material conveying
Carcass options EP, NN or cotton fabric on request Select according to tension and flexibility
Belt width 400–2200 mm typical Custom widths can be discussed
Ply number 2–6 plies typical Higher ply counts for heavier loads
Tensile strength 100–3150 N/mm typical range Confirm by conveyor tension calculation
Cover thickness Top 1.5–10 mm; bottom 1.5–6 mm Increase top cover for abrasion or impact
Cover grade General, abrasion-resistant or project-specified rubber Match to conveyed material
Working temperature −20 to +80 °C typical Use heat or cold grades for extremes
Applications Coal, aggregate, limestone, sand, cement raw material Not for oil, high heat or flame risk unless specified

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.