Conveyor Belts
Rubber Conveyor Belt for Bulk Material Handling
- Carcass
- EP, NN or cotton fabric on request
- Belt width
- 400–2200 mm typical
- Cover grade
- General, abrasion-resistant or project-specified rubber
- Minimum order
- 300 m
Conveyor Belts
Corrugated sidewall and cross-cleat belt for steep incline and vertical lift where floor space is limited.
Minimum order300 m
A sidewall belt turns the belt into a moving container. Corrugated walls bonded along each edge hold the material in, cross cleats stop it sliding back, and the result will convey up to vertical where a conventional inclined conveyor would need a run of many times the height.
Base belt is EP fabric or reinforced rubber, with steel cord available for special high-tension cases, in widths from 500 to 2400 mm. Sidewalls run 40 to 400 mm, with T, TC, TCS or custom cleats at a pitch set by layout and capacity.
This is an engineered belt, not a stock item. Sidewall height, cleat type and pitch are derived from capacity, angle, lift height and material, and they interact — raising the wall to gain capacity changes the minimum pulley diameter the belt will tolerate.
Send us capacity, conveyor angle, lift height, material and a layout drawing. Without a drawing we cannot confirm the design, and a sidewall belt that does not match its conveyor cannot be adjusted on site.
| Sidewall height | 40–400 mm typical |
|---|---|
| Cleat type | T, TC, TCS or custom cleat |
| Conveyor angle | 0–90° depending on design |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Corrugated sidewall conveyor belt | Steep angle conveying |
| Base belt | EP fabric or reinforced rubber belt | Steel cord option for special high tension |
| Belt width | 500–2400 mm typical | Depends on capacity and sidewall height |
| Sidewall height | 40–400 mm typical | Select by material load and angle |
| Cleat type | T, TC, TCS or custom cleat | Depends on material and incline |
| Cleat pitch | Custom by layout and capacity | Confirm with drawings |
| Conveyor angle | 0–90 degrees depending on design | Vertical conveying possible with proper design |
| Applications | Cement, aggregate, mining, fertilizer, recycling | Space-saving transfer |
| Inquiry data | Capacity, angle, lift height, material, drawing | Required for accurate design |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.