Conveyor Belts
Flame Resistant Conveyor Belt for Coal Handling
- Carcass
- EP, NN or solid woven
- Belt width
- 500–2200 mm typical
- Key property
- Reduced flame propagation, anti-static options
- Minimum order
- 300 m
Conveyor Belts
General-purpose fabric-reinforced rubber belt for everyday bulk conveying in mining, cement and ports.
Minimum order300 m
This is the belt most bulk conveyors run on. A reinforced fabric carcass carries the tension, durable rubber covers take the abrasion and impact, and the construction is deliberately ordinary so it works with standard troughing idlers, pulleys and belt cleaners.
Carcass options are EP, NN or cotton fabric, from 2 to 6 plies, in tensile ratings from 100 to 3150 N/mm. Top covers run 1.5–10 mm and bottom covers 1.5–6 mm; the top cover is the number to increase when the material is abrasive or the loading point is severe.
Working range is −20 to +80 °C. Outside that, or where oil, flame or chemical exposure is involved, the correct answer is a specific grade rather than a thicker general belt — see the heat, cold, oil, flame and acid-alkali resistant belts in this section.
| Carcass | EP, NN or cotton fabric on request |
|---|---|
| Belt width | 400–2200 mm typical |
| Cover grade | General, abrasion-resistant or project-specified rubber |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Fabric reinforced rubber conveyor belt | General duty bulk material conveying |
| Carcass options | EP, NN or cotton fabric on request | Select according to tension and flexibility |
| Belt width | 400–2200 mm typical | Custom widths can be discussed |
| Ply number | 2–6 plies typical | Higher ply counts for heavier loads |
| Tensile strength | 100–3150 N/mm typical range | Confirm by conveyor tension calculation |
| Cover thickness | Top 1.5–10 mm; bottom 1.5–6 mm | Increase top cover for abrasion or impact |
| Cover grade | General, abrasion-resistant or project-specified rubber | Match to conveyed material |
| Working temperature | −20 to +80 °C typical | Use heat or cold grades for extremes |
| Applications | Coal, aggregate, limestone, sand, cement raw material | Not for oil, high heat or flame risk unless specified |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.