Conveyor Accessories
H-Type Tungsten Carbide Belt Cleaner
- Cleaner type
- Primary belt cleaner
- Blade material
- Tungsten carbide / alloy carbide
- Applicable belt width
- 500–2400 mm, customizable
Conveyor Accessories
Primary polyurethane cleaner mounted at the head pulley, with replaceable blades and a 500–2400 mm range.
The primary cleaner is the one that does most of the work. Mounted against the head pulley in the discharge area, its polyurethane blade takes off the bulk of the material that would otherwise ride back down the return side and end up on idlers, pulleys and the floor.
The H-type frame carries a replaceable blade, so servicing is a blade change rather than a cleaner change — which matters when the cleaner is in a chute and access time is the real cost.
Frames are carbon steel, or stainless steel for washdown and corrosive duty, for belt widths from 500 to 2400 mm.
Blade tension is what makes a cleaner work and what destroys a belt when it is wrong. Set it to the manufacturer’s figure and check it as part of routine maintenance; a cleaner cranked down hard cleans no better and takes cover off the belt.
| Cleaner type | Primary belt cleaner |
|---|---|
| Blade material | Polyurethane |
| Applicable belt width | 500–2400 mm, customizable |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Product name | H-Type Polyurethane Belt Cleaner | |
| Cleaner type | Primary belt cleaner | Head pulley, first line of cleaning |
| Blade material | Polyurethane | For general and moderately abrasive material |
| Frame material | Carbon steel / stainless steel optional | Stainless for washdown and corrosive duty |
| Applicable belt width | 500–2400 mm, customizable | Confirm with belt width and chute clearance |
| Installation position | Head pulley discharge area | Requires access for tensioning and blade change |
| Suitable materials | Coal, ore, stone, cement, aggregate, bulk materials | Not for hot material without review |
| Customization | OEM and drawing-based production available | Made to existing frame or drawing |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.