Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Accessories

H-Type Polyurethane Belt Cleaner

Primary polyurethane cleaner mounted at the head pulley, with replaceable blades and a 500–2400 mm range.

Similar products
  • Removes bulk material at the discharge point
  • Replaceable blade helps reduce service time
  • Suitable for continuous industrial conveyor systems
  • Maintains stable cleaning under different conditions

The primary cleaner is the one that does most of the work. Mounted against the head pulley in the discharge area, its polyurethane blade takes off the bulk of the material that would otherwise ride back down the return side and end up on idlers, pulleys and the floor.

The H-type frame carries a replaceable blade, so servicing is a blade change rather than a cleaner change — which matters when the cleaner is in a chute and access time is the real cost.

Frames are carbon steel, or stainless steel for washdown and corrosive duty, for belt widths from 500 to 2400 mm.

Blade tension is what makes a cleaner work and what destroys a belt when it is wrong. Set it to the manufacturer’s figure and check it as part of routine maintenance; a cleaner cranked down hard cleans no better and takes cover off the belt.

Specifications

Cleaner type Primary belt cleaner
Blade material Polyurethane
Applicable belt width 500–2400 mm, customizable

Technical specifications

Parameter Typical specification Selection note
Product name H-Type Polyurethane Belt Cleaner
Cleaner type Primary belt cleaner Head pulley, first line of cleaning
Blade material Polyurethane For general and moderately abrasive material
Frame material Carbon steel / stainless steel optional Stainless for washdown and corrosive duty
Applicable belt width 500–2400 mm, customizable Confirm with belt width and chute clearance
Installation position Head pulley discharge area Requires access for tensioning and blade change
Suitable materials Coal, ore, stone, cement, aggregate, bulk materials Not for hot material without review
Customization OEM and drawing-based production available Made to existing frame or drawing

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.