Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Accessories

P-Type Polyurethane Belt Cleaner

Secondary polyurethane cleaner for the return run, removing the fine carryback a primary cleaner leaves.

Similar products
  • Removes fine carryback after the head pulley
  • Replaceable blade helps reduce service time
  • Suitable for continuous industrial conveyor systems
  • Maintains stable cleaning under different conditions

A primary cleaner removes the bulk of the material but always leaves a fine film behind. That film is what builds up on return idlers and tail pulleys, and it is the usual reason a conveyor with a working primary cleaner still mistracks and still leaves a pile under the return run.

The P-type secondary cleaner works against the flat belt section after the head pulley, taking off what the primary left. Used together, the pair is far more effective than either alone.

Frames are carbon steel or optional stainless steel for belt widths from 500 to 2400 mm, with replaceable polyurethane blades.

A secondary cleaner needs a flat, supported length of return belt to work against. If there is no suitable position, say so when you enquire and we will look at the layout rather than supplying a cleaner that has nowhere to mount.

Specifications

Cleaner type Secondary belt cleaner
Blade material Polyurethane
Applicable belt width 500–2400 mm, customizable

Technical specifications

Parameter Typical specification Selection note
Product name P-Type Polyurethane Belt Cleaner
Cleaner type Secondary belt cleaner Works behind a primary cleaner
Blade material Polyurethane For fine residual carryback
Frame material Carbon steel / stainless steel optional Stainless for washdown and corrosive duty
Applicable belt width 500–2400 mm, customizable Confirm with belt width and return frame layout
Installation position After head pulley / return belt area Flat belt section required
Suitable materials Coal, ore, aggregate, cement, sand, gravel Not for hot material without review
Customization Available according to drawings or site requirements Made to existing frame or drawing

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.