Conveyor Accessories
Belt cleaner
Remove residue, dust, and debris from the conveyor belt to prevent material from entering pulleys and idlers, which would cause misalignment and damage.
Conveyor Accessories
Secondary polyurethane cleaner for the return run, removing the fine carryback a primary cleaner leaves.
A primary cleaner removes the bulk of the material but always leaves a fine film behind. That film is what builds up on return idlers and tail pulleys, and it is the usual reason a conveyor with a working primary cleaner still mistracks and still leaves a pile under the return run.
The P-type secondary cleaner works against the flat belt section after the head pulley, taking off what the primary left. Used together, the pair is far more effective than either alone.
Frames are carbon steel or optional stainless steel for belt widths from 500 to 2400 mm, with replaceable polyurethane blades.
A secondary cleaner needs a flat, supported length of return belt to work against. If there is no suitable position, say so when you enquire and we will look at the layout rather than supplying a cleaner that has nowhere to mount.
| Cleaner type | Secondary belt cleaner |
|---|---|
| Blade material | Polyurethane |
| Applicable belt width | 500–2400 mm, customizable |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Product name | P-Type Polyurethane Belt Cleaner | |
| Cleaner type | Secondary belt cleaner | Works behind a primary cleaner |
| Blade material | Polyurethane | For fine residual carryback |
| Frame material | Carbon steel / stainless steel optional | Stainless for washdown and corrosive duty |
| Applicable belt width | 500–2400 mm, customizable | Confirm with belt width and return frame layout |
| Installation position | After head pulley / return belt area | Flat belt section required |
| Suitable materials | Coal, ore, aggregate, cement, sand, gravel | Not for hot material without review |
| Customization | Available according to drawings or site requirements | Made to existing frame or drawing |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.