Conveyor Belts
Steel Cord Conveyor Belt for Long-Distance Conveyors
- Cord rating
- ST500–ST5400 typical range
- Belt width
- 800–3000 mm typical
- Key property
- Very low elongation in service
- Minimum order
- 300 m
Conveyor Belts
Heat-resistant cover belt for clinker, coke, sinter and slag, graded to about 100–180 °C.
Minimum order300 m
Hot material does not wear a belt out, it bakes it. General rubber exposed to clinker or sinter hardens, crazes and then cracks through to the carcass, and the belt fails from the cover inward long before the fabric is worn.
Heat-resistant compounds hold their elasticity at elevated temperature, with grades covering roughly 100 to 180 °C depending on compound. Carcass can be EP, NN or steel cord; covers are 4–16 mm top and 2–8 mm bottom in widths to 2400 mm.
Grade selection depends on continuous temperature, peak temperature, particle size and belt speed — a belt that sees 150 °C in short bursts on a fast belt is a different specification from one sitting under a steady 120 °C load. Send us all four figures.
Belt cleaners and loading support need to suit the temperature too. A standard polyurethane blade against a hot belt will not last, and it will damage the cover while it fails.
| Carcass | EP, NN or steel cord |
|---|---|
| Belt width | 500–2400 mm typical |
| Heat grade | About 100–180 °C depending on compound |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Heat-resistant rubber conveyor belt | Fabric or steel cord construction |
| Carcass options | EP, NN or steel cord | Select by tension and conveyor length |
| Belt width | 500–2400 mm typical | Custom widths by project |
| Heat grade | For hot material service up to about 100–180 °C depending on compound | Confirm continuous and peak temperature |
| Cover thickness | Top 4–16 mm; bottom 2–8 mm typical | Increase for abrasion and impact |
| Cover compound | Heat-resistant rubber | Do not substitute with general rubber |
| Applications | Clinker, coke, sinter, slag, foundry sand | Hot bulk material handling |
| Inquiry data | Material temperature, particle size, belt speed, width, length | Needed for grade selection |
| Compatibility | Use heat-suitable cleaners and loading support | Improves belt life |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.