Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Accessories

P-Type Tungsten Carbide Belt Cleaner

Secondary carbide cleaner for abrasive duty, removing stubborn carryback that polyurethane cannot shift.

Similar products
  • Removes stubborn fine carryback
  • Long service life on abrasive material
  • Suitable for continuous industrial conveyor systems
  • Maintains stable cleaning under different conditions

Some carryback does not come off with a polymer blade — fine clinker, cement and hard ore residues bond to the belt surface and need a harder edge to break them free. Carbide tips on a secondary cleaner will lift that material where polyurethane simply polishes it.

This cleaner works on the return belt after the head pulley, behind a primary cleaner rather than instead of one.

Frames are carbon steel or optional stainless steel for belt widths from 500 to 2400 mm.

Carbide on a secondary position requires a belt in sound condition. It is recommended for stable belt surfaces; on a belt with cover damage, exposed fabric or mechanical fasteners, a polyurethane secondary is the safer specification. Send us the belt condition and splice type with your enquiry.

Specifications

Cleaner type Secondary belt cleaner
Blade material Tungsten carbide / alloy carbide
Applicable belt width 500–2400 mm, customizable

Technical specifications

Parameter Typical specification Selection note
Product name P-Type Tungsten Carbide Belt Cleaner
Cleaner type Secondary belt cleaner Works behind a primary cleaner
Blade material Tungsten carbide / alloy carbide For stubborn fine carryback
Frame material Carbon steel / stainless steel optional Stainless for washdown and corrosive duty
Applicable belt width 500–2400 mm, customizable Confirm with belt width and return frame layout
Installation position After head pulley / return belt area Flat belt section required
Suitable materials Ore, coal, clinker, limestone, cement, aggregate Abrasive material handling
Customization Recommended for abrasive materials and stable belt surfaces Made to existing frame or drawing

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.