Conveyor Belts
Sidewall Conveyor Belt for Steep Incline Conveying
- Sidewall height
- 40–400 mm typical
- Cleat type
- T, TC, TCS or custom cleat
- Conveyor angle
- 0–90° depending on design
- Minimum order
- 300 m
Conveyor Belts
Pipe-forming belt that closes into a tube in service, containing dust and allowing curved routes.
Minimum order300 m
A pipe conveyor belt is rolled closed by its idler panels so the material travels inside a sealed tube. Dust and spillage are contained, the return run can be closed as well, and because a closed tube resists twisting, the conveyor can follow horizontal and vertical curves that would otherwise need transfer towers.
The engineering property that matters is transverse stiffness. Too soft and the pipe will not hold its shape under load; too stiff and it will not close properly or negotiate the curves. That balance is designed into the belt and cannot be adjusted afterwards.
Carcass is EP fabric or steel cord, widths 600 to 3000 mm, forming pipe diameters from 150 to 700 mm, with abrasion, heat, flame or project-specific covers.
A pipe belt is not interchangeable with a flat belt and must match the idler panel system it runs in. Send us pipe diameter, route layout including all curves, capacity and material — the route drawing is essential, not optional.
| Carcass | EP fabric or steel cord |
|---|---|
| Pipe diameter | 150–700 mm typical project range |
| Key property | Controlled transverse stiffness |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Pipe-forming rubber conveyor belt | For enclosed conveying |
| Carcass options | EP fabric or steel cord | Select by tension and route length |
| Belt width | 600–3000 mm typical | Related to pipe diameter |
| Pipe diameter | 150–700 mm typical project range | Determined by capacity and material |
| Cover grade | Abrasion, heat, flame or project-specific rubber | Match to conveyed material |
| Key property | Controlled transverse stiffness | Required for stable pipe formation |
| Applications | Mining, ports, power plants, cement, steel | Dust and spillage control |
| Inquiry data | Pipe diameter, route layout, capacity, curves, material | Design data required |
| Component note | Must match pipe conveyor idler system | Not interchangeable with ordinary flat belt |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.