Conveyor Belts
Acid and Alkali Resistant Conveyor Belt
- Carcass
- EP or NN fabric typical
- Belt width
- 400–2200 mm typical
- Cover compound
- Chemical-resistant rubber
- Minimum order
- 300 m
Conveyor Belts
Moulded-cleat belt that stops material rolling back on inclines of roughly 18–35 degrees.
Minimum order300 m
Past about 18 degrees, loose material starts sliding back down a flat belt faster than the belt carries it up. Moulded chevron cleats give the material something to sit against, extending the usable incline to roughly 35 degrees depending on the material and the profile chosen.
Profiles are open V, closed V, Y, multi-V or custom, in heights of 5, 10, 15, 25 and 32 mm, over an EP or NN carcass in widths from 400 to 2000 mm. Higher profiles hold steeper inclines; lower profiles are easier on the conveyor.
Profile choice follows material behaviour rather than angle alone — fine dry sand, wet aggregate and bagged goods each need different geometry at the same incline. Tell us the material, its moisture, the incline and the capacity.
Plan the belt cleaner at the same time. A standard blade set against a chevron belt will tear the profiles off; the cleaner has to suit the pattern, and that constrains which profile you can use.
| Profile type | Open V, closed V, Y, multi-V or custom |
|---|---|
| Profile height | 5, 10, 15, 25, 32 mm typical |
| Incline angle | Often 18–35° depending on material and profile |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Profiled rubber conveyor belt | Inclined conveying |
| Carcass options | EP or NN fabric | Select by tension and pulley diameter |
| Belt width | 400–2000 mm typical | Custom widths available |
| Profile type | Open V, closed V, Y, multi-V or custom pattern | Choose by material behaviour |
| Profile height | 5, 10, 15, 25, 32 mm typical | Higher profile for steeper incline |
| Incline angle | Often 18–35 degrees depending on material and profile | Confirm with actual material |
| Cover grade | General or abrasion-resistant rubber | Other grades on request |
| Applications | Coal, aggregate, sand, grain, fertilizer, packaged goods | For rollback control |
| Cleaner note | Use cleaner suitable for chevron profile | Prevents profile damage |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.