Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Chevron Conveyor Belt for Inclined Conveying

Moulded-cleat belt that stops material rolling back on inclines of roughly 18–35 degrees.

Minimum order300 m

Similar products
  • Reduced material rollback
  • Incline grip profiles
  • Multiple profile heights
  • Cleaner-friendly selection

Past about 18 degrees, loose material starts sliding back down a flat belt faster than the belt carries it up. Moulded chevron cleats give the material something to sit against, extending the usable incline to roughly 35 degrees depending on the material and the profile chosen.

Profiles are open V, closed V, Y, multi-V or custom, in heights of 5, 10, 15, 25 and 32 mm, over an EP or NN carcass in widths from 400 to 2000 mm. Higher profiles hold steeper inclines; lower profiles are easier on the conveyor.

Profile choice follows material behaviour rather than angle alone — fine dry sand, wet aggregate and bagged goods each need different geometry at the same incline. Tell us the material, its moisture, the incline and the capacity.

Plan the belt cleaner at the same time. A standard blade set against a chevron belt will tear the profiles off; the cleaner has to suit the pattern, and that constrains which profile you can use.

Specifications

Profile type Open V, closed V, Y, multi-V or custom
Profile height 5, 10, 15, 25, 32 mm typical
Incline angle Often 18–35° depending on material and profile
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Profiled rubber conveyor belt Inclined conveying
Carcass options EP or NN fabric Select by tension and pulley diameter
Belt width 400–2000 mm typical Custom widths available
Profile type Open V, closed V, Y, multi-V or custom pattern Choose by material behaviour
Profile height 5, 10, 15, 25, 32 mm typical Higher profile for steeper incline
Incline angle Often 18–35 degrees depending on material and profile Confirm with actual material
Cover grade General or abrasion-resistant rubber Other grades on request
Applications Coal, aggregate, sand, grain, fertilizer, packaged goods For rollback control
Cleaner note Use cleaner suitable for chevron profile Prevents profile damage

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.