Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Cold Resistant Conveyor Belt for Outdoor Mining

Cold-grade rubber belt for outdoor and winter conveying, flexible down to about −40 °C.

Minimum order300 m

Similar products
  • Low-temperature flexibility
  • Reduced cracking risk
  • Cold-start suitability
  • Custom carcass choice

Standard rubber stiffens as it gets cold. On an exposed conveyor that means the belt resists troughing, the covers crack where they flex around the pulleys, and the worst damage happens on a cold start before anything has warmed up.

Cold-resistant compounds stay flexible to around −40 °C depending on grade. Carcass is EP or NN fabric at 200–3150 N/mm, in widths from 400 to 2200 mm.

The number we need is the lowest ambient temperature at the site, not the average winter temperature — the belt has to survive the coldest morning of the year, and it will be started under load on that morning. Send us that figure along with the material, pulley diameter and start-up condition.

In winter service, scraper pressure and pulley lagging matter more than usual. A cleaner set hard against a stiff cold belt takes cover off it; easing the pressure through the cold months is worth doing.

Specifications

Carcass EP or NN fabric typical
Belt width 400–2200 mm typical
Cold grade Down to about −40 °C depending on compound
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Cold-resistant rubber conveyor belt For low-temperature service
Carcass options EP or NN fabric typical Choose by tension and flexibility
Belt width 400–2200 mm typical Custom widths available
Strength range 200–3150 N/mm typical Confirm by conveyor design
Cold grade Commonly selected for service down to about −40 °C depending on compound Confirm lowest ambient temperature
Cover thickness Top 2–12 mm; bottom 1.5–6 mm Select for abrasion plus cold flexing
Applications Outdoor mines, ports, stockyards, power plants, winter aggregate handling Especially exposed conveyors
Inquiry data Lowest temperature, material, pulley diameter, start-up condition Needed before quotation
Maintenance note Check scraper pressure and pulley lagging in winter Reduces cover damage

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.