Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

EP Fabric Conveyor Belt for Mining and Cement

Polyester-nylon carcass belt with low elongation and stable dimensions, for medium and long conveyors.

Minimum order300 m

Similar products
  • Low elongation carcass
  • Good troughability
  • High strength-to-weight ratio
  • Stable medium-long conveying

EP belts use a polyester warp and nylon weft. The polyester is what keeps elongation low, so the take-up travel stays short and the belt holds its length instead of creeping through the first months of service. On a long conveyor that is the difference between a take-up that works and one that runs out of stroke.

Ratings run EP100 to EP630 per ply, 2 to 6 plies, 200–3150 N/mm total, in widths from 400 to 2400 mm. Covers are 2–12 mm top and 1.5–6 mm bottom, available in general, abrasion, heat, oil, flame or cold resistant grades.

If you are replacing an existing belt, send us the marking printed on it — that is faster and more reliable than recalculating from conveyor data, and it avoids a mismatch at the splice.

Specifications

Carcass EP100–EP630 per ply; higher by design
Belt width 400–2400 mm typical
Key property Low elongation, good troughability
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type EP polyester fabric rubber conveyor belt Low elongation fabric belt
Carcass options EP100–EP630 per ply; higher ratings by design Use existing belt marking if replacing
Belt width 400–2400 mm typical Confirm with conveyor frame width
Ply number 2–6 plies typical Depends on tension and pulley diameter
Tensile strength 200–3150 N/mm typical Calculated from conveyor tension
Cover thickness Top 2–12 mm; bottom 1.5–6 mm Select for abrasion and impact
Cover grade General, abrasion, heat, oil, flame or cold resistant Choose by operating condition
Elongation Lower than NN belts in comparable service Useful for longer conveyors
Applications Mining, cement, aggregate, ports, power plants General heavy-duty bulk handling

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.