Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Heat Resistant Conveyor Belt for Hot Materials

Heat-resistant cover belt for clinker, coke, sinter and slag, graded to about 100–180 °C.

Minimum order300 m

Similar products
  • Heat-resistant cover compound
  • Protects carcass from hardening
  • Fabric or steel cord construction
  • For clinker, coke and sinter

Hot material does not wear a belt out, it bakes it. General rubber exposed to clinker or sinter hardens, crazes and then cracks through to the carcass, and the belt fails from the cover inward long before the fabric is worn.

Heat-resistant compounds hold their elasticity at elevated temperature, with grades covering roughly 100 to 180 °C depending on compound. Carcass can be EP, NN or steel cord; covers are 4–16 mm top and 2–8 mm bottom in widths to 2400 mm.

Grade selection depends on continuous temperature, peak temperature, particle size and belt speed — a belt that sees 150 °C in short bursts on a fast belt is a different specification from one sitting under a steady 120 °C load. Send us all four figures.

Belt cleaners and loading support need to suit the temperature too. A standard polyurethane blade against a hot belt will not last, and it will damage the cover while it fails.

Specifications

Carcass EP, NN or steel cord
Belt width 500–2400 mm typical
Heat grade About 100–180 °C depending on compound
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Heat-resistant rubber conveyor belt Fabric or steel cord construction
Carcass options EP, NN or steel cord Select by tension and conveyor length
Belt width 500–2400 mm typical Custom widths by project
Heat grade For hot material service up to about 100–180 °C depending on compound Confirm continuous and peak temperature
Cover thickness Top 4–16 mm; bottom 2–8 mm typical Increase for abrasion and impact
Cover compound Heat-resistant rubber Do not substitute with general rubber
Applications Clinker, coke, sinter, slag, foundry sand Hot bulk material handling
Inquiry data Material temperature, particle size, belt speed, width, length Needed for grade selection
Compatibility Use heat-suitable cleaners and loading support Improves belt life

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.