Conveyor Belts
Heat Resistant Conveyor Belt for Hot Materials
- Carcass
- EP, NN or steel cord
- Belt width
- 500–2400 mm typical
- Heat grade
- About 100–180 °C depending on compound
- Minimum order
- 300 m
Conveyor Belts
Galvanized steel cord belt for long-distance, high-tension conveying where elongation must stay near zero.
Minimum order300 m
Above a certain tension and length, fabric belts stop being an option and the carcass has to be steel. Galvanized cords, laid in a single plane and bonded into the rubber, carry ratings from ST500 to ST5400 with elongation low enough that take-up travel stays manageable over kilometres of conveyor.
Widths run 800 to 3000 mm with heavy covers — 5–16 mm top, 5–10 mm bottom — in abrasion, heat, flame, cut-resistant or project-specific grades.
The splice is the part to get right. Steel cord belts need a hot vulcanized splice built to a design matched to the cord rating and pitch; a poor splice, not the belt, is what fails on these systems. Confirm the splice design with us before supply, and tell us whether you need splice materials and supervision as well as belt.
| Cord rating | ST500–ST5400 typical range |
|---|---|
| Belt width | 800–3000 mm typical |
| Key property | Very low elongation in service |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | Steel cord rubber conveyor belt | High-tension belt |
| Common ratings | ST500–ST5400 typical range | Select by tension calculation |
| Belt width | 800–3000 mm typical | Large widths by project |
| Cord material | Galvanized steel cord | Designed for rubber adhesion |
| Cover thickness | Top 5–16 mm; bottom 5–10 mm typical | Depends on abrasion and impact |
| Elongation | Very low in service | Supports long-distance conveying |
| Cover options | Abrasion, heat, flame, cut or special rubber | Match to material and safety needs |
| Splice method | Hot vulcanized splice recommended | Confirm splice design before supply |
| Applications | Mines, ports, overland conveyors, cement, power plants | High-capacity critical conveyors |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.