Conveyor Belts
Flame Resistant Conveyor Belt for Coal Handling
- Carcass
- EP, NN or solid woven
- Belt width
- 500–2200 mm typical
- Key property
- Reduced flame propagation, anti-static options
- Minimum order
- 300 m
Conveyor Belts
Polyester-nylon carcass belt with low elongation and stable dimensions, for medium and long conveyors.
Minimum order300 m
EP belts use a polyester warp and nylon weft. The polyester is what keeps elongation low, so the take-up travel stays short and the belt holds its length instead of creeping through the first months of service. On a long conveyor that is the difference between a take-up that works and one that runs out of stroke.
Ratings run EP100 to EP630 per ply, 2 to 6 plies, 200–3150 N/mm total, in widths from 400 to 2400 mm. Covers are 2–12 mm top and 1.5–6 mm bottom, available in general, abrasion, heat, oil, flame or cold resistant grades.
If you are replacing an existing belt, send us the marking printed on it — that is faster and more reliable than recalculating from conveyor data, and it avoids a mismatch at the splice.
| Carcass | EP100–EP630 per ply; higher by design |
|---|---|
| Belt width | 400–2400 mm typical |
| Key property | Low elongation, good troughability |
| Minimum order quantity | 300 m |
| Parameter | Typical specification | Selection note |
|---|---|---|
| Belt type | EP polyester fabric rubber conveyor belt | Low elongation fabric belt |
| Carcass options | EP100–EP630 per ply; higher ratings by design | Use existing belt marking if replacing |
| Belt width | 400–2400 mm typical | Confirm with conveyor frame width |
| Ply number | 2–6 plies typical | Depends on tension and pulley diameter |
| Tensile strength | 200–3150 N/mm typical | Calculated from conveyor tension |
| Cover thickness | Top 2–12 mm; bottom 1.5–6 mm | Select for abrasion and impact |
| Cover grade | General, abrasion, heat, oil, flame or cold resistant | Choose by operating condition |
| Elongation | Lower than NN belts in comparable service | Useful for longer conveyors |
| Applications | Mining, cement, aggregate, ports, power plants | General heavy-duty bulk handling |
Typical values for selection. Final specification is confirmed against your operating conditions before quotation.
OEM & custom manufacturing
The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.
Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.
Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.
Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.
173 6756 8999
Tell us the material, capacity and belt width and we will recommend a model.
17367568999
Add on WeChat and note the product name.
+8618231522417
On a phone, tap the button. On a computer, scan the code with WhatsApp.
zdfhetr@outlook.com
Send the operating conditions and we will reply with a selection and quote.
Leave your contact information and operating conditions; our technical team will respond as soon as possible. If you are unsure about the model, we can help you select based on your conditions.