Skip to main content
Zhongyu Heavy Industry Idlers · Pulleys · Belts · Belt conveyors

Conveyor Belts

Oil Resistant Conveyor Belt for Oily Materials

Nitrile-based cover belt for oily and greasy material, resisting the swelling that destroys ordinary rubber.

Minimum order300 m

Similar products
  • Oil-resistant cover compound
  • Reduced swelling risk
  • Custom fabric carcass
  • Processing-line durability

Oil does not abrade a belt, it dissolves into it. Ordinary rubber in contact with oily material swells, softens and loses its bond to the carcass — the belt grows wider and longer, goes slack, and the cover starts lifting.

Oil-resistant and nitrile-based compounds resist that absorption. Carcass is normally EP or NN fabric at 200–3150 N/mm, with steel cord available for high tension, in widths from 400 to 2200 mm.

Compound selection depends on which oil and at what concentration — mineral oil, vegetable oil and animal fat each attack rubber differently, and a compound that handles one may do poorly against another. Tell us the oil type, the material, the temperature and the belt rating.

Oil combined with heat needs a separate review. That combination is harder on a belt than either condition alone and does not always have an off-the-shelf answer.

Specifications

Carcass EP or NN fabric typical
Belt width 400–2200 mm typical
Cover compound Oil-resistant or nitrile-based rubber
Minimum order quantity 300 m

Technical specifications

Parameter Typical specification Selection note
Belt type Oil-resistant rubber conveyor belt For oily or greasy materials
Carcass options EP or NN fabric typical Steel cord on request for high tension
Belt width 400–2200 mm typical Custom widths available
Strength range 200–3150 N/mm typical Calculated by conveyor tension
Cover compound Oil-resistant or nitrile-based rubber option Depends on oil type and concentration
Cover thickness Top 2–12 mm; bottom 1.5–6 mm Increase for abrasion and cleaning load
Working temperature −20 to +80 °C typical High oil plus heat needs special review
Applications Fertilizer, recycling, biomass, chemical by-products, oily materials Avoid using general rubber for oil contact
Inquiry data Oil type, material, temperature, width, length, belt rating Required for accurate selection

Typical values for selection. Final specification is confirmed against your operating conditions before quotation.

OEM & custom manufacturing

Every item in this catalogue is made to your duty, not to a stock list.

The specification row on every product reads "customizable" because that is how these parts are built: one proven body, with the material, dimensions and surface treatment chosen for the material you convey and the frame you already have. Send a drawing or the operating conditions and we will come back with a specification.

  • Material

    Carbon steel, alloy steel, stainless steel, HDPE or ceramic, chosen for what the material does to the running surface.

  • Dimensions

    Diameter, length, shaft form and mounting made to your frame or drawing, so the part goes straight onto the existing conveyor.

  • Surface treatment

    Painting, powder coating, galvanizing, rubber, polyurethane or ceramic lagging, selected for the duty rather than the catalogue.